If you’re a guitarist who’s just getting started with GarageBand and are dying to jump in a start recording, you may be overwhelmed with the different gear options available to you.
Chapter 4 Tutorial 2: Learning to Play Guitar and Piano 43 To play a section repeatedly: 1 Click the Cycle button (with curved arrows) in the control bar. 2 Click the section you want to play. Shift-click adjacent sections to play them in sequence. 3 Click the Play button, or press the Space bar. AmpliTube comes with a great collection of gear that includes 11 pedal effects (delay, fuzz, overdrive, wah, envelope filter, chorus, flanger, phaser, octave, noise filter and distortion), five amps (clean, crunch, lead, metal and bass), five speaker cabs and two microphones (dynamic 87 and condenser 87). Price: £23.99/$19.99. Launch GarageBand for iPad and plug your guitar into the iRig. On the left of the screen is a ' 1/4' jack' button which lets you add a noise gate. Handy for those distorted tones. Next to it is the guitarist's best friend: the Tuner. No excuses for a flat g-string! With the right gear and an Apple computer (they all come with GarageBand already installed) you don't really need an amplifier to play guitar. I've gotten to the point where the only thing I use for my electric guitar is my pedalboard and the amp models in GarageBand.
While many would argue that the only way to accurately capture an electric guitar performance is by mic’ing up your amplifier and hitting record, in my latest video I share 3 ways that you can directly input your guitar into your Mac so that you can record it in GarageBand.
Directly inputting (or ‘DI-ing’) your instrument in this way gives you more control over how your recording sounds if you choose to use Garageband’s built in amp designer and/or Audio Unit plug ins.
Check it out below:
You can find the gear mentioned in the video here:
TOOGOO(R) 3M Guitar to PC USB Recording Cable
IK Multimedia iRig Pro I/O
Focusrite Scarlett 2i2
How do you prefer to record your guitars in GarageBand? What gear do you use? Leave a comment and let me know or come join the conversation on Facebook and Twitter.
In this article, I’ll show you exactly how to plug your guitar into GarageBand using a quick summary as well as a thorough step-by-step process. The way I do it not only sounds good but it’s also convenient, moreover, it minimizes latency and other problems too.
To plug your guitar into Garageband, connect the computer to an audio interface like the Scarlett 2i2. In Garageband’s Preferences, set the Input to the Interface and the Output to “Built-in Output.” After plugging the guitar in and selecting the Audio track, click the monitoring button to hear it.
by the way, I have a list of all the best products for music production on my recommended products page, including the best deals, coupon codes, and bundles, that way you don’t miss out (you’d be surprised what kind of deals are always going on).
How to Plug Your Guitar Into GarageBand
There are a few different ways of doing this, and some are significantly better than others. I’m just going to show you the way that I do it with a short video below and then a full-on walkthrough.
I have a couple of pieces of necessary gear (the following 4 links take you to Amazon):
- Obviously, your guitar.
- A Firewire to USB Cable
- an Audio Interface (I use the Focusrite Saffire 6USB. The Scarlett 2i2 is good too.)
- A USB-C to USB cable (The only reason this adapter is necessary is I’m using the latest edition of the MacBook Pro. The older generation MacBook Pro doesn’t need this adapter).
- Regular Guitar Cable.
If you’re new to music production, understand that a lot of this equipment will come in handy for years to come.
If you’re serious about recording and producing, much of this equipment and more are a necessity, so just grab some of it off Amazon and be done with it, by the way, I couldn’t recommend JamPlay’s website enough if you are serious about learning how to play guitar in one of the most efficient ways imaginable (use the coupon code “1buck,” which makes the first month practically free).
Without further ado,
The actual steps:
1) Connect your Firewire cable to your MacBook Pro. In most cases, this cable will come with your purchase of an audio interface, or a MIDI keyboard. However, if you don’t have one for whatever reason, I’m sure you can pick one up from Amazon for cheap.
2) Usually, the port for the firewire cable is on the back of the Audio Interface. Plug the other part of the firewire cable into the back of the Audio Interface.
In my case, the Firewire to USB has to go into the USB-C adapter that I mentioned earlier.
3) Now, assuming you have the Focusrite Saffire 6USB, it should be powered by your computer. You don’t have to plug it in or anything like that, so all of its lights will turn on which you can see on the front of the unit.
4) Open GarageBand.
5) Click “Open Project,” or one of your old existing files. It doesn’t matter.
6) Once it brings up the “Choose A Track Type Page,” Click on where it says: “Built-in Input.”
7) This should be all that’s needed for this part of the process. However, assuming this is the first time that you’ve ever done this, it wouldn’t be a bad idea to click on where it says, “Built-in Output.”
8) That should bring up your “Output” and “Input” Devices under the Audio-MIDI region preferences.
9) Make sure you’ve selected “Built-in Output,” if you’re using your computer as your speaker, or the speakers that are hooked up to your laptop.
10) Select your Audio Interface for the “Input Device.”
11) Now, once you’re back at the “Choose A Track Type Page,” then click on one of the two subheadings below, either the “Guitar option,” or the “Microphone option.” This should bring up your MIDI Region and all of your controls.
12) In the “Smart Controls Area,” make sure that you’ve selected your audio-interface where it says, “Input.”
13) Now, plug your guitar into the front of your Audio Interface.
14) Click on the “Monitoring Button,” which looks like an upside down Wi-Fi symbol. This part is important, otherwise, you won’t be able to hear what you’re even playing.
15) You can now select whatever kind of amp you want, whether it’s a “clean guitar,” “crunch guitar,” “acoustic guitar,” “distorted guitar,” “experimental guitar,” “clean bass,” “crunch bass,” and “experimental bass.”
16) You want to hit the “Monitoring” button beside your track-header as well. I’ve highlighted the upside down Wi-Fi-looking symbol with a black circle. It’ll turn orange once it’s been selected.
Under each heading, there are quite a few options that all sound pretty good, especially after you tweak them to your preferences.
And it’s pretty much as simple as that.
There are some problems that you can run into when doing all of this for the very first time. For that reason, I’ll explain some of the problems that I’ve had when I first started out.
Common Problems and Annoyances As A Beginner
1) Make sure that the gain on your Audio-Interface isn’t turned up too much, otherwise, you’re going to be feeding GarageBand too hot of a signal, which will make it sound distorted and bad.
2) Make sure the “Pad,” and “Inst,” buttons are turned off on your audio interface, assuming you own a Focusrite Saffire 6USB. I imagine there are similar controls on other audio interface models.
I find that these buttons make the signal too powerful as well, and thus, create distortion. For example, you can use “INST” setting (which stands for instrument), on the Focusrite Scarlett 2i2 instead of keeping it turned off. Use the “AIR” feature to give it a bit more juice if you want.
Strum Guitar In Garageband Youtube
3) Latency. I’ve never actually had latency problems when using an Audio Interface, but some people do have this problem, and the solution – as I’ve explained in my article dedicated to the subject – is usually fairly straightforward.
Essentially, if you’re having latency issues, there could be a number of different causes, however, most of them will be a result of your set-up and incorrect settings for your gear.
For instance, you want to make sure that – if you’re running more than one track – you have the monitoring button turned on for only one of them, rather than every single track.
Other Ways Of Recording Your Guitar In GarageBand
1) You can also use your MacBook’s microphone. This is for very rough demos, obviously, because this way of doing it is going to make a very low-quality recording. However, if you’re desperate, and want to record something, this method will work.
- To do this, you just open a new “Audio” track in your workspace.
- And then click on the “Record” button.
- Start playing the guitar with your amplifier close to it, and that should be enough for a very rough demo.
2) You can also purchase a Guitar to USB cable and hook your guitar directly up to GarageBand. This is an inferior way of recording guitar tracks as well, but it works if you’re running on a string budget.
(This is what a guitar-jack to USB looks like. I don’t own one so I couldn’t take a picture. I had to piece these two images together, but this is what it looks like).
GarageBand will immediately recognize this as an input, so you don’t have to worry about there being compatibility issues.
However, like the method above, you’ll likely run into latency.
3) Use a small portable audio interface like the iRig HD 2 (my dedicated review) if you plan on only running one instrument through your DAW. This is pretty much the same as the main method which I described in detail above.
The only difference is that you’ll be using a much smaller, and likely, limited audio interface. The good thing about this is that it’s relatively inexpensive. Small interfaces are becoming exceedingly popular, like the iRig for example.
I haven’t picked one of these up yet, but once I start traveling around Europe, I imagine I’ll eventually purchase one. I’ll make sure to write a review on it once I do.
Update: You have to use the iRig HD 2 if you want it to work with a PC computer or Mac. The iRig 2 is only good for mobile.
4) Another popular way would be to mic your guitar amplifier up to your audio interface and then through GarageBand.
This is a decent option, but I prefer just to run my guitar directly through GarageBand, rather than doing this. Amplifiers are too big and cumbersome, and I would much rather limit the amount of gear I own to just a guitar like my PRS SE Custom 24 from ZZounds and BlueCat’s Axe Pack from Plugin Boutique.
Strum Guitar Garageband
Before playing your guitar in GarageBand, know that there’s a default tuner right in the DAW, although, Blue Cat Audio’s Hot Tuna (also on Plugin Boutique) is much better. There was a time when I would use the default tuner on occasion, but these days, I use the Hot Tuna instead because it’s way better.
How To Tune Your Guitar Using GarageBand
1) Your guitar is plugged into your audio interface in the computer, so it’s as simple as clicking on the tuning fork beside the center of the DAW where it shows the time signature, tempo, and key signature.
Strumming Guitar Garageband Mac
2) When you click on the tuning fork icon, it’ll bring up the meter where you can tune your guitar.
Other Features
One of the great things about using a DAW for your guitar is all of the great VST plug-ins that you can use for your guitar.
For example, you can download amplifier simulators and cabs for your set up using my tutorial here, and while it may not sound good as the original which the plug-ins are modeled after, they still sound good enough to use, and they’re good enough for the vast majority of people.
That’s all for now. If this helped you out, do me a favor and share it on social media.
YouTube Video Tutorial
Conclusion
I hope this was helpful to you. Share it on social media, it would be greatly appreciated.